STEPPER DRIVES

2) P70360

The P70360 is offered in three standard versions. The P70360-SD is designed with a conventional step and direction interface. Dedicated inputs are available for Jog+/-, enable and Step/direction control. The user provides the pulse train to rotate the motor. The P70360-PN adds a cost effective indexing capability to the base drive allowing the user to program up to 63 independent moves. The P70360-R4 adds a RS-485 interface to the P70360-PN model.

• Input voltage: 120 to 240 VAC (1 phase, 50/60 Hz) for a broad range of power sources
• Continuous Current: 2.5 Amps, Microstep Peak Current: 3.5 Amps
• Max Shaft Power: 525 W
• Speed Range: 0 to 50 Rev/Sec
• Motor Inductance: 50 to 200 mH (320 VDC BUS), 7 to 30 mH (160 VDC BUS)
• 9 Programmable Inputs
• 63 Programmable Independent Moves (-PN and -RN models)
• Modus RTU Compatibly (-PN and -RN models)
• Easy to Use Graphical User Interface
• Open Loop Stall Detection