 |
1) AC SERVO DRIVES
Our AC servo drives are designed to complement our wide range of rotary and linear three phase brushless servomotors and offer the broadest connectivity available in the global marketplace today. These drives bring you advanced control technology along with compact packaging and simplified commissioning.
|
 |
2) S200
Danaher Motion S200 servo drives are the first all-digital industrial drives with a velocity loop bandwidth of 800 Hz. If you are looking for a high performance servo drive in
a small package, Danaher Motion's S200 drives extend the benefits of servo motion control technology to new levels of machine design.The drive offers unmatched system throughput and simplified tuning. The high resolution (24-bit) feedback and high performance (3-5 kHz) current loop bandwidth provide smooth motion and rapid response to optimize machine performance and throughputs. The intelligent feedback device with electronic motor nameplate allows plug and play commissioning by eliminating... |
 |
3) S300
S300 Series digital brushless servo amplifiers are compact and easy-to-use amplifiers that offer a maximum range of flexibility to your project design. The small footprint saves space in the switchgear cabinet; the broad connectivity reduces the number of different types of amplifier.
In combination with our brushless servomotors featuring AKM, CDDR, DDR and DDL series servo motors, the S300 series offers the most advanced features and broadest connectivity available in the global marketplace today.
Features
CE, UL, cUL
Operation directly from grounded 115 to 480V, 3-phase, 50-60hz AC lines
Output current 1.5 to 10A rms/phase,... |
 |
4) S400
The digital multi-axis system SERVOSTAR 400 is completely software-compatible with the well-known and established S600. The internal bus connection between the modules tremendously simplifies system wiring. For a system with 8 axes, this means
- ONE power line connection
- ONE enable connection
- ONE BTB contact
- ONE fieldbus connection (in + out)
- ONE PC connection (RS232)
Features
CE, UL, cUL
Operation directly from 115 to 400 VAC lines (ungrounded operation allowed)
Output current 3 or 6A rms/phase, continuous
Power supply and regen circuit integrated in the master... |
 |
| |
5) S600
Designed for worldwide usability the SERVOSTAR® 600 series of servo amplifiers makes deliberate use of the advantages of digital servo technnology. Highly flexible hardware and software, simple operation and wide function range even in the standard device are convincing arguments. In combination with our brushless servomotors featuring AKM, CDDR, DDR and DDL series servo motors, the S600 offers the reliable solution for your demanding single and multi-axis applications.
Features
CE, UL, cUL
Operation directly from 230 to 480 VAC
Output current 1.5 to 70A rms/phase, continuous
Integrated Regen circuit (up to 20A)
With integral... |
|
 |
| |
6) S700
The challenges faced by today's mechanical and process engineers include an increasing demand for a broader range of products and services, higher productivity, as well as increased supply availability and reliability.
With its new S700 servo amplifier, Danaher Motion is now able to offer a product that is definitely up to these challenges. The S700, which is based on the S300 architecture, is a fully digital servo amplifier with extended functionality that is ideal for complex drive tasks.
In light of the fact that a growing number of engineers are moving towards Ethernet based communications such as EtherCAT... |
|
 |
7) CD SERIES 5
The ServoSTAR CD Series 5 is a high-performance digital servo motor amplifier, supporting current, velocity, or position mode. Numerous position control options are offered, ranging from the classical ±10Vdc command, through encoder following and pulse-and-direction, all the way to SynqNet and SERCOS control. Choose from four velocity control algorithms to optimize performance on your system, and use the function to quickly and easily achieve high performance operation. The CD Series 5 is a highly versatile amplifier, capable of driving a vast product basket of motors and their assorted feedback devices. The drive comes in sizes of 3, 6, 10 and... |
 |
| |
8) MMC SMART DRIVE
G&L Motion Control's MMC Smart Drive servo amplifiers provide 0.5kW to 65kW continuous output power in a compact, easy-to-apply package. Available in both 230 and 460VAC systems, MMC Smart Drives operate over a wide line voltage range. Application of MMC Smart Drives is simple. The integral power supply and plug-and-play cable sets simplify installation. Configuration, tuning, and maintenance are intuitive using PiCPro software with features including basic and expert parameter views, a software oscilloscope and auto-tune. Use PiCPro's ladder logic, function block, and structured text programming languages to develop complete multi-axis motion control solutions combining MMC Smart Drives and MMC... |
|
 |
| |
1) D2400
The D2400 is designed for positioning applications requiring simple linear extend and retract motion which REQUIRE variable speed control. The D2400 commands linear move profile based on input activation. Six optically coupled inputs and four open-collector outputs allow for a simple interface to interface with external devices such as PLCs, I/O cards, simple pushbutton operator stations and "Normally Open" position sensors. |
|
 |
2) D2500
The D2500B Series is an analog position control which accepts an analog voltage or current command input and translates the signal into a proportional linear displacement. The control is used with electric cylinders containing a linear potentiometer (-L) option. Feedback from the linear potentiometer is proportional to distance. The control compares this feedback to the scaled command input, providing a closed loop linear positioning system. |
 |
| |
1) P70530
The P70530 is offered in two standard versions. The P70530-SD is designed with a conventional step and direction interface. Dedicated inputs are available for Jog+/-, enable and Step/direction control. The user provides the pulse train to rotate the motor. The P70530-PN adds a cost effective indexing capability to the base drive allowing the user to program up to 63 independent moves.
Input voltage: 20 to 75 VDC
Continuous Current: 5 Amps, Microstep Peak Current: 7.1 Amps
Max Shaft Power: 300 W
Speed Range: 0 to 50 Rev/Sec
Motor Inductance: 2 to 15 mH[read more] |
|
|
| |
2) P70360
The P70360 is offered in three standard versions. The P70360-SD is designed with a conventional step and direction interface. Dedicated inputs are available for Jog+/-, enable and Step/direction control. The user provides the pulse train to rotate the motor. The P70360-PN adds a cost effective indexing capability to the base drive allowing the user to program up to 63 independent moves. The P70360-R4 adds a RS-485 interface to the P70360-PN model.
Input voltage: 120 to 240 VAC (1 phase, 50/60 Hz) for a broad range of power sources
Continuous Current: 2.5 Amps, Microstep Peak Current: 3.5 Amps |
|
 |
3) 6400 (PacSci)
The Pacific Scientific 6400 series high performance microstepping drives are modular to support a broad range of requirements. These drives offer excellent value for low voltage DC input-powered applications. The 6410 model has step and direction inputs. The 6415 model has the addition of an oscillator allowing a +/- 10 VDC input command for speed control.
Input voltage is from 24 to 75 VDC for a broad range of power sources.
Output current is selectable from 0.625 to 7.1 amps for motors up to size 42.
Microstepping resolution is selectable via DIP switches up to 51,200 steps... |
 |
|
4) SMARTSTEP (IDC)
The IDC SmartStep is a complete, packaged microstepping drive/control that provides a user friendly system as well as many compelling features and benefits. This drive incorporates the latest anti-resonance technology to maximize the torque and optimize the performance of step motors. The SmartStep drive uses IDC's IDeal™ programming language, and Application Developer software package simplifying set-up and integration.
Features
Input voltage is 90 - 120 VAC (190 - 240 VAC for SmartStep-240) Single Phase 50/60 Hz for a broad range of power sources
Output current range from 0 to 7.9 amps (0 to 3.0 amps for SmartStep-23... |
|
