Hollin Applications Ltd. (New Site Under Construction) 19

 
LA14
LA24
 
Actuator Electronics
Limit Switches
Parallel Options
Power Supplies
Position Feedback
oops
 
Chain Brake Alarm
Electronics
 
Industrial Actuators
T90
T130
Linear Units Movo
Gantry Systems
 
 
 
 
 

 

Load Master 80

This amazing rodless actuator can be used for a variety of different tasks from disabled vehicles to patient lifts in hospitals. There are two different versions of this actuator the first is a horizontal lifting mechanism and the other is vertical. this rigid self supporting aluminium actuator operates very quietly so is perfect for domestic or medical use.

  • Trapezoidal or ball screw drive
  • Spring loaded soft stop at the end of stroke
  • Stroke up to 1500mm
  • Speed up to 110mm/s
  • Load up to 2000N

Optional extras incude:

  • Hand winding system
  • Spline safety function
  • Alternative motor positions

 

On this Actuator there are available the following options,

  • Motor Voltages of DC 12, 24 and 36 volts.
  • Screw threads of 4, 8, or 16 tpi.
  • Gears ratios of 9 or 17 to 1.
  • Strokes from 1 to 6 inches in 1 inch steps.
  • Speeds of 60,20,10 mm/sec
  • Loads of 100, 350 and 500 Newtons
  • End of Stroke Limit Switches
  • Potentiometer Feedback.
LM80 Technical
Available Strokes
 
1,2,3,4,5,6 inches
Load Range
 
140N, 260N, 380N, 500N
Speed Range
 
Motor Voltages
 
12, 24, 36 Volt DC
   
   
   
Electronic Controls
Power Supply Options
 
Battery or Tr ansformer
Switch
 
  • Reverse Pole Switch
  • Electronic Limit Switches
  • Remote Switching
  • Handset Controls

Position Control  
  • Potentiometer Feedback
  • Encoder Feedback
  • Follower Contro
  • MultiPosition Controls

Sample Applications,

  • Lever Movement
  • Handbake Pullers

DownLoad LM80 Data Pages only

About Us | Contact Us | ©Oct1 2007 Hollin Applications Ltd